600*21mm Acoustic panel for hospital Decoration

Installed in the hospital's waiting area, wards, conference rooms and other areas, it can absorb the noise of the crowd, the operating sound of medical equipment, etc., reduce the noise level in the hospital, and create a quiet and comfortable medical treatment and rest environment for patients.

Product Description

1. Acoustic performance: creating a quiet diagnosis and treatment environment
Efficient sound absorption and noise reduction: The thickness of 21mm and the porous structure can effectively absorb the voices of people, equipment operation sounds (such as monitors, infusion pumps) and footsteps in the corridor in the hospital, reduce the noise decibels (such as controlling the noise in the ward below 40dB), and avoid noise interference with patients' rest and medical staff's work.
Targeted sound insulation design: When used on the ward partition wall, it can reduce the sound penetration of adjacent rooms; when installed near the nurse station, it can absorb the call system and medical conversation sounds to prevent noise from spreading to the ward area.
2. Hygiene and safety characteristics: meet the epidemic prevention needs of hospitals
Antibacterial and moisture-proof materials: Special sound-absorbing panels for hospitals usually use antibacterial coatings (such as adding silver ion antibacterial agents) or PVC coated surfaces, which can inhibit bacterial growth (such as Escherichia coli and Staphylococcus aureus). At the same time, the moisture-proof performance prevents the wall from being moldy due to spraying disinfectant or humid environment, which meets the "Hospital Disinfection and Hygiene Standards".

3. Environmental protection and fire prevention requirements
Low formaldehyde release: As a sensitive place, the hospital's sound-absorbing panels must meet the E0 environmental protection standard (formaldehyde release ≤ 0.06mg/m³) to avoid decoration pollution affecting the health of patients.
Fire protection level compliance: Usually it must meet the B1 fire protection requirements (flammable materials), and will not spread or release toxic gases when exposed to open flames, in line with the "Fire Protection Code for Building Interior Decoration Design".

Specific application scenarios and design solutions

1. Ward area

Wall decoration: Install 600×21mm sound-absorbing panels on the bedside background wall or the entire wall, and choose light colors (such as beige, light gray) with wood grain textures to create a warm atmosphere and absorb the sound of air conditioning operation and patient turning noise. It can be matched with anti-collision corner guards to prevent the bed from colliding and damaging the board.

Sound insulation details: Sound-absorbing strips can be embedded in the joints between the ward door and the wall, and the sound-absorbing panels can form an overall sound insulation system to isolate external noise outside the ward.

2. Waiting area and corridor

Ceiling sound absorption: The ceiling of the waiting hall uses 600×21mm perforated sound-absorbing panels (perforation rate ≥20%), with mineral wool sound-absorbing layers, to absorb the sound of people talking and calling broadcasts, and reduce the reverberation time of the space (such as controlling the reverberation time to 0.8-1.0 seconds).

Corridor wall decoration: The strip splicing design is adopted, and the 600mm width is convenient for horizontal paving, forming a simple sense of lines, while reducing construction joints. The surface of the board can be printed with the hospital LOGO or abstract medical theme patterns to enhance the recognition of the space.